Manufacturer
AudioQuest Sydney 3.5mm - 3.5mm Interconnect 1.0m - NEW OLD STOCK

AudioQuest Sydney 3.5mm - 3.5mm Interconnect 1.0m - NEW OLD STOCK

Superb sounding new cable from Audioquest

£110.00    
£91.67 Exc. VAT |  |

AudioQuest Sydney 3.5mm - 3.5mm Interconnect 1.0m - NEW OLD STOCK - RRP £239


SOLID PERFECT-SURFACE COPPER+ CONDUCTORS (PSC+)

Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSC+ simply outperforms all previously available copper metals at any price. All of Sydney's conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Sydney’s very clean sound.

POLYETHYLENE AIR-TUBE INSULATION

Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. All of Sydney’s conductors use PE Air-Tube Insulation because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. PE Air-Tube Insulation causes much less of the out-of-focus effect common to other materials.

CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS)

100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground plane.

DOUBLE-BALANCED ASYMMETRICAL GEOMETRY

Purpose designed for single-ended applications, Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

COLD-WELDED DIRECT-SILVER PLATED PURE "PURPLE-COPPER" PLUGS

This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability. Purple-Copper offers a cleaner, clearer sound over nickel-plated or OFHC metals commonly found in competing manufacturers' plugs. Direct-Silver Plating offers one more important step toward greater clarity and doing no harm to the signal.

Features:

  • Metal: Solid Perfect-Surface Copper+ (PSC+) Conductors
  • Plugs: Cold-Welded Silver-Plated Pure "Purple Copper"
  • Geometry: Asymmetrical Double-Balanced (lower impedance)
  • Dielectric: Polyethylene Air-Tubes
  • NDS: Carbon-Based 3-Layer Noise-Dissipation System
 

 

 

 

 

 

 

 

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction